BP 12 Electric Pump Inflatables SUP

Electrical pump designed to inflate inflatable SUP boards.

The Scoprega BP 12 offers a smart and effortless solution for inflating your inflatable SUPs.

You can set the desired pressure level, and the pump will automatically stop when the set level is achieved. It can reach a maximum pressure of 14.5PSI (1 bar); the pump operates on a 12V DC power supply, with an air flow rate of 42.27gallons (160litres) per minute.

A valve connector for inflatable SUPs and a bag with a shoulder strap are included.

This pump includes a tube measuring 5.58feet (1.7meters) and a power cord that is 9.84feet (3meters) long.

Also suitable for inflatable boats and kites.

Instructions:

• Use the two crocodile clips to connect the pump to a 12Volt battery - NOTE: A 12V accessory socket plugin (Car Cigarette Lighter plugin) is not included in this pump kit, as the pump's power is too great for that socket.
• Attach the suitable valve-connector to the tube
• Insert it into the SUP, kite, or boat valve
• Set the appropriate air pressure level on the BP 12 Electric for what you are inflating
• Press the start button
• The pump will stop automatically when the selected air pressure level is attained

Measurements:

• 20.5cm x 10.5cm x 13cm