Steps to Install BMX Cranks

Follow these straightforward instructions in our video to successfully install your BMX cranks:

1. Apply grease to the spindle of your crank and insert it into the bottom bracket.
2. Use a rubber hammer to secure it in position.
3. Place the bearing cover on and apply grease to the visible part of the spindle.
4. Ensure adequate clearance between the crank and your frame; add a spacer if necessary.
5. Slide on the crank and fasten it with a greased bolt.
6. Attach the other bearing cover.
7. Align the sprocket-bearing crank with the first crank.
8. Once more, use a greased bolt to tighten everything in place.

Your cranks are now properly installed!