Installing Roller Skate Bearings Made Easy
This video provides a guide on installing bearings into roller skate wheels. With just a skate tool, you'll be all set!
Guide to Installing Roller Skate Bearings:
- Begin by taking off the nut from the axle using a skate tool.
- Place 2 bearings onto the axle.
- Position the wheel on the axle with the outside turned downwards. Use both hands to press it completely down to allow the first bearing to fit into the wheel.
- Take away the wheel and slip the spacer onto the axle.
- Then, turn the wheel over and press it again to make sure the second bearing is correctly fitted.
Your bearings are securely installed!
Common Questions:
Can skateboard bearings be used for roller skates?
Indeed, skateboard bearings are suitable for roller skates. Just ensure your roller skates' wheel axles have an 8 mm diameter!
How can you remove bearings from roller skate wheels?
You may use a bearing remover tool or the wheel axle from your roller skates.
What number of bearings is required for roller skates?
Each pair of roller skates requires 16 bearings (2 per wheel).
Are spacers necessary for roller skates?
If you're only using your roller skates for cruising or dancing and tightening the wheels doesn't obstruct the bearings, then spacers are optional. However, if you engage in aggressive roller skating or if the wheels get caught when tightened, spacers become necessary.
Additional Resources You May Like: